BrightWhiteTM Diffuse Reflector
(higher numbers are more diffusive)
|Efficiency in typical luminaire||Comment|
|White Reflector||Diffuse white||Up to 30% increase||Ultra high reflectivity increases luminaire efficiency by up to 30%|
Ultra-high Reflectivity Increases Luminaire Efficiency
BrightWhite™ diffuse, white reflectors provide ultra-high reflectivity for use in lighting, illumination, displays, and signage. Luminaires lined with BrightWhite™ reflectors can provide up to 30% more light output than those lined with white paint, solder mask, or powder coat.
BrightWhite™ reflectors are available as a film, with or without adhesive. They are easily and cleanly cut using laser, die, shear, or blade cutters. Shapes can be created with standard thermoforming techniques to line the interior surfaces of luminaires. Metal versions are compatible with shear, punch, roll, and other standard sheet metal processes.
BrightWhiteTM White Reflector Materials
||Thickness, mm (inch)
| Film with Adhesive and Liner
| Thermoformable Film
| Thin Film
| Thin Film with Adhesive and Liner
| Bright White Metal
||Aluminum or Steel Sheet/Coil
|| Contact Us
*Measured using a flat anvil tipped micrometer, (thickness based on average gsm will result in a number ~0.7 mil less because of the anti-gloss, anti-wetout surface structures and a ball micrometer will yield an intermediate value)
*This is not a specification. Values are typical and are subject to change without notice.
|Available Width||Continuous rolls up to 52 inches wide, with optional adhesive and removable liner
|Available form factors||Roll, sheet, cut parts, thermoformed shapes
|Masking||Available with an easily-removable protective masking film. Many customers elect to operate without masking due to the durability and cleanability of the BrightWhite™ film
Bright View’s BrightWhiteTM reflectors maintain performance over a wide range of conditions. They have been thoroughly tested to the following criteria.
|UV weatherability||Displays no discoloration from exposure to ultraviolet light
Less than 0.5% reflectance change after 2.4 MJ/m2 of UVA at 60°C
|Thermal Stability||Less than 0.5% reflectance change after 1000 hours exposure to 80°C|
|Humidity Stability||Less than 0.5% reflectance change after 1000 hours exposure to 60°C and 95% RH|
|Cleaning||Water and gentle detergent recommended. Tolerates general household cleaners containing chlorine and ammonia cleaning agents|
|Mechanical||Easily cut, creased, thermoformed, etc. Inquire for details|
Form Factors and Converting
Roll and Sheet
BrightWhite™ white reflectors are available in roll and sheet form, up to 52 inch width. Available with removable protective masking film. Also available with adhesive and easily-removable liner.
BrightWhite™ reflectors are easily cut by standard methods, and leave clean edges with no fraying. Bright View can provide BrightWhite™ reflectors precisely cut to customer drawings, or can work with your preferred converter.
BrightWhite™ reflectors can be easily thermoformed into 3D shapes using standard processes and equipment. Thicker grades are offered specifically for thermoforming. Bright View can directly supply formed parts or provide process parameters to customers’ preferred converter/thermoformer.
BrightWhite™ reflectors are available on steel or aluminum, and are readily formable using industry-standard processes.
- BrightWhite™ reflectors can increase the output of light fixtures by up to 30% when installed properly
- BrightWhite™ reflectors are most effective when combined with high-efficiency diffusers, such as Bright View diffusers
- For best performance, cover all interior surfaces of the luminaire with BrightWhite™ reflector and avoid creating narrow corners or overlaps that could serve as “light traps”
- For best performance, angle the sides of the BrightWhite™ reflector outward toward the diffuser